Top 12 Best Wet Tile Saw under $300 2023 – Buying Guide

We mostly use a wet tile SAW whilst we want to redo our restroom or kitchen backsplash, or maybe any room floor. Hence finding a moist tile saw turns into so essential that you need to do full research to buy one.

A tile moist SAW is a simple, fast & specialized tool for tile cutting. If you are trying to cut smaller tiles you could buy a small tabletop saw. For your comfort, we have assembled a list of the best-wet tile saw under $300.

Things To Consider Before Buying The Best Wet Tile Saw Under $300

To buy the best-wet tile saw for under $300, you need to consider blade, saw size, water source, and motor power.


  • An accurate blade is very critical because it will help you to make you clean and deliver your smooth cuts.
  • Some hints and trips permit you to cut your tiles like an expert. If you’ll reduce normal tiles then a normal blade is good.
  • But if you are planning to cut stones, ceramic tiles, or marbles then you want to buy a good fine and sharp area blade.
  • Diamond blades are first-rate in this situation as it leaves no sharp edges on your cut.

Saw Size

  • Most saws built for owners are typically small and compact. The reason for this, home-use saws are meant now not to take in the storage space.

Water Source

  • Some model has water reservoirs and even pumps, at the same time as other capabilities consist of hose to connect the noticed with an external water source like taps.
  • Nevertheless, choosing a tool providing a pump and an inner water reservoir is a smart buy for owners.

Motor Power

  • Most wet tiles characteristic a motor with power inside 1 – 2.5 HP.
  • However, for a small home-based tile saw, 1 HP must be sufficient and, at most, the electricity of 1. five HP.
  • But for expert use, you need to bear in mind a tile noticed comes with motor energy of 2.5 HP.

Top 12 Best Wet Tile Saw under $300

1. SKIL Tile Saw- best-wet tile saw under $300

SKIL Tile Saw- Wet Tile Saw

Check Price On Amazon


  • Sliding side extensions.
  • Excellent water containment system.
  • Three different angles bevel cuts.
  • Adjustable rip fence with a miter gauge.


  • The fence is a bit tricky to move with good accuracy.

This version is an ideal desire for domestic DIYers and additionally works properly for personal contractors. This 7-inch wet tile saw is sturdy enough to close through numerous jobs with impressive minimum water drip.

SKIL 3550-02 7-Inch Wet Tile Saw makes a touch mess, unlike other tabletop moist saws at the market. It capabilities a hydro-lock water reservoir machine that guarantees that the blade has water contained near, which is chargeable for the saw dripping very little water without compromising efficiency. This is one of the best skill 7-in wet tabletop tile saw.

Further, you might not spend quite a little time cleansing and making the usage of this saw in your house comfortable. This model comes with strong plastic construction and an aluminum tabletop to handle a whole lot of weight. Sadly, the extension arm is made from plastic, which is a bit disappointing.

SKIL 3550-02 7-Inch Wet Tile Saw is long-lasting and functions as a decently running blade guard. However, a few of upgrades ought to make this unit incredible. For the price, this saw offers a notable cost for the money. Plus, it is very transportable and lightweight.

Customer review’s

This saw works exceptionally well for cutting and shaping tiles.

2. DEWALT D24000S

DEWALT D24000S Best Lowes Wet Tile Saw Under 300

Check Price On Amazon


  • Smooth precision cuts
  • Portable
  • Lightweight
  • Adjustable water nozzles
  • Powerful
  • Adjustable stands


  • Requires more room because of its stand

This 10-inch wet tile Saw offers a more cutting diameter with its motor that rotates the blade with 4200 RPM. With this strong force, it easily cuts through all the things like butter.

Furthermore, this gear has no motor so you will not face the issue of worn-out gears that improves the life of the machine.

It has 2 water nozzles that accommodate 5 gallons of water in it, these features allow us to produce less friction and more smooth cutting.

Customer review’s

I have been in the business of tiles for more than 30 years now, and this unit is amazing, lightweight, and has great water repression.



Check Price On Amazon


  • Excellent power and impressive cutting.
  • It only weighs 32 pounds making it easy to transport.
  • Sliding tray for guiding the tile as you cut.
  • Low price to avoid the future cost of renting.


  • Small what reservoir.

Coming up next on our assessment is Porter-Cable PCE980 Wet Tile Saw. This 7-inch model functions as a porcelain tile blade and is a good deal for people trying to own a cost-powerful and dependable notice. Porter-Cable pce980 is a good design.

This unit is geared up with an onboard miter rectangular to assist you to reduce with splendid precision and accuracy every time. Also, you get a spectrum of functions for this small price to scale back on excess muddle and debris.

The tabletop is made from chrome steel to resist heavy-responsibility use and more than one project. Coming with an innovative design, this tool features a drain plug water channels to assist attenuate the mess and make cleaning it after use a breeze. This is a good porter cable tile saw.

When you’re done, all you have to do is find the convey handles of the roll cage to transport the saw to wherever it’s miles safe and secure.

Thanks to its design, house owners can without problems tuck this moist tile noticed away until the next mission or your paintings truck for the subsequent day’s task. Regardless, Porter-Cable PCE980 Wet Tile Saw is always prepared whilst the want for it arises.

Customer review’s

Porter table saw is the best when it comes to performance at the best available price.

4. SKIL 3540-02 7-Inch

SKIL 3540-02 7-Inch Wet Tile Saw

Check Price On Amazon


  • Low-price tile saw
  • Incredible quality for longevity and high performance.
  • Quick and easy to set up.
  • Cut deeper than most models in its price range.


  • Not a smart buy for professionals. It has a small water reservoir.

When your price range and cash are a problem, this device is a top recommendation. The SKIL 3540-02 is a performing budget option you may choose this year. This model could be very durable and has a protracted shelf life, even when used regularly.

While this saw comes with an affordable fee tag, it cut different materials flawlessly and without an issue. Also, the laser guides included are a very good addition, but the tabletop has a measurement, because of this there is not a real need for them.

Customer review’s

This saw offers a smooth and flawless cutting through almost every kind of tile.

5. WEN 71745

WEN 71745 Wet Tile Saw

Check Price On Amazon


  • Affordable
  • Portable
  • Has miter gauge for making angled cuts
  • 5-inch diamond blade


  • Water spillage

This strong and powerful SAW rotates the blades with up to 5000 RPM and motor power with 4.1 amp. It can easily cut through stone and ceramic tiles.

This SAW will not cut in just straight angles but is also great for making beveled cuts of around 45 degrees. The water nozzles in this unit allow the blades to remain cool during the cutting, but some users have faced issues due to this feature because there is a slight spillage of water.

Customer review’s

My husband bought this unit and he just couldn’t stop bragging about how great it works, despite being lightweight and portable.

6. MK Diamond 157222 Tiler Saw

MK Diamond 157222 Tiler Saw

Check Price On Amazon


  • Metal sliding tray
  • High quality material
  • The rear fence is adjustable


  • Expensive
  • Drainage lack

This SAW has a blade of 7-inches, a water pump and it cuts easily. A positive of this unit is that it is very easy to set up and has a great water pump.

For its price, it is a good unit but when you are cutting big tiles with it, it will miss the tray and the water spills all-around.

You can easily cut the average tiles because of its powerful motor, which is a great feature considering its price. This SAW may not be made with high-quality material but it is very durable.

Customer review’s

This tile saw has changed our lives. I am shocked for the performance it has to offer at such a price and I would not hesitate to say that this is the best wet tile saw under $300.


DEWALT DWC86W Wet Tile Saw

Check Price On Amazon


  • Easy to use
  • Light in weight
  • Has a value for money invested in


  • The saw base does not extend enough and as such one has to move along with it while working

If you are looking for the best wet tile saw under $300, this is your product to go for! This is the following model this is a handheld with a powerful motor of up to 10.eight Amp. It works nicely in reducing granite, marble, glass, and porcelain. It is light in weight such that as one operates the tools, there may be no such accumulation of fatigue.

As such, it is easier to paintings on several projects. This is a good Dewalt wet tile saw. It has an adjustable water connection that maintains the blade as cool as possible. This also helps in minimizing the water puddles within the environment.

The adjustable length gives adequate allowance for the operator to cut one-of-a-kind lengths as desired. At the equal time, lock buttons help to reduce fatigue even as producing the required output.

Besides, the grip inside the rubber over-mold provides comfort at the same time as working. Above the whole thing else, Dewalt DWc86w 4-3/eight inch moist noticed comes with a 12″ water line that feeds water to the blade.

This increases its existence span and exceptional performance. With 3 years of limited assurance and a 90-day cash back guarantee, that is a guarantee that the tool will offer the fine service. The price too is pocket-pleasant and worth buying.

Customer review’s

Being a DIY enthusiast I needed something easy to use and highly portable. This product offers everything from performance to quality and durability at such a reasonable price.

8. Chicago Electric 10″ IndustrialChicago Electric 10″ Industrial Wet Tile Saw

Check Price On Amazon


  • Easy to use
  • Great precision
  • Strong power to manage projects


  • Does not send enough of overspray to maintain coolness

This is another super deal in our list of 5 high-quality moist tile saws under $300. The 2. five HP 10″ Industrial Tile/Brick Saw is an excellent and renowned brand while activities with energy gear are concerned. It’s rated most of the topmost useful gear available in the market due to the accuracy it has when the slicing of the porcelain is concerned.

It has a cutting capacity of as much as 24” due to the fact the electricity is strong sufficient to manipulate the same. Its motor has a twin capacitor that has sealed bearings to manage any overload, and as such, there’s the amazing cutting ability. It has one of the best 10-inch tile saw blades.

Moreover, the adjustable reducing head lets one adjust the blade according to the depth goals in the course of cutting the tiles. Since it has an outsized metal frame, the operator could make precisions so one can produce excessive output and smooth cuts as desired.

Being a big machine, it’s manufactured with duty solid alloys to make sure decreased vibrations and give room for comfort throughout the operations. Besides, a warranty of at least 90 days comes alongside the tool upon purchase and a fair price.

Customer review’s

This is a great working tile seen present these days, hands down. I have been using it for quite some time now. It has never given any kind of problem and is the best-wet tile saw under $300.

9. Leegol Electric 7-Inch

Leegol Electric 7-Inch Wet Tile Saw

Check Price On Amazon


  • Power motor equipped with thermal protector
  • Rust-resistant chrome-plated table
  • Accommodates bevel cuts from 0 up to 45 degrees
  • Lightweight and portable
  • Produces accurate cuts
  • Easy to set-up


  • Thin and low quality blade
  • Difficult to empty and refill water reservoir

The 7-Inch Leegol Electric Wet Tile Saw comes with a 15-3/4” × 16-1/2” table dimension. It is equipped with a 120 V 60 Hz induction motor with up-to 3,550 RPM and a 7-inch diamond blade allowing you to paintings with all varieties of tile and masonry.

This moist tile saw has an adjustable rip fence and miter manual to ensure specific instantly and angled cuts. It diamond-coated blade produces clean cuts. Bevel cuts ranging from zero as much as 45-tiers are feasible permitting it to make various sorts of cuts. Users have claimed that it is the best wet tile saw under $300.

Customer review’s

This is a good product with many good features and specifications that are enough for everyone to get the job done.

10. Flex CS 40 Wet Tile Saw

Flex CS 40 Wet Tile Saw

Check Price On Amazon


  • Powerful motor
  • Good performance
  • Cuts thick pieces easily


  • It comes without blades

It makes bevel cuts at the angle of 45 degrees and runs on a 12 amp motor. This can also reach up to the high speed of 12000 RPM.

The big advantage of this unit is that you can easily fit large blades in it that make it more capable. Because of the variance in size, you have to remove the blades before carrying them to the other place.

Customer review’s

I have been using it for a while now, and it is a very durable SAW.

11. Lackmond WTS950LN

Lackmond WTS950LN Cheap Wet Tile Saw

Check Price On Amazon


  • Heavy blade
  • Good hosepower motor


  • Can’t easily be carried around

The Lackmond 7” Beast Sliding Tray Tile Saw is a famous preference among people who are searching for a reliable tile noticed with a stand. It’s clean to move around, thanks to its locking wheels, and it has a powerful motor that’s great for maintenance and again splash projects. It’s a good wet tile saw withstand.

This noticed boasts a no-load speed of 7,000 rpm, due to its 1. four hp motor and 7-inch tile slicing blade. It is also capable of 45-diploma bevel cuts, and it has a plunge cut functionality of around 2.25 inches deep. Bevels are also smooth to make since the slicing head rotates, and the tile is supported fully on the sliding tray.

This version also can cut tiles up to sixteen inches diagonally. The noticed also can without difficulty be wheeled around a piece area, and storage is straightforward with its folding stand.

Besides the manual rail on the oversized aluminum work table, the Lackmond 7” Beast Sliding Tray Tile Saw is also prepared with a laser guide for unique cuts. This version is thus an excellent option for those searching out a clean-to-use tile saw whole with a sliding tray.

Customer review’s

This is an efficient tool for beginners and professionals for a sound working setup. In my recommendation, it is one of the best-wet tiles saw under $300.

12. SKIL 3601-02

SKIL 3601-02 Wet Tile Saw

Check Price On Amazon


  • Portable
  • Easy to use and set up
  • Gives smooth cuts
  • Better than table saws


  • One-sided, not reversible
  • Not good for complex cuts

SKIL 3601-02 Flooring Saw could be very lightweight and offers smooth and smooth cuts to stable and laminate flooring. Professional users recommended this saw better than the table saws. According to them, this one is the best-wet tile saw under $300.

For the light-weight and size, you can take it any area or spot and paintings with it there. It also offers 0-forty five-degree flexible and easy cuts. So you could deliver any shape or size in your tiles and do DIY works as well.

The blade has good slicing capacity so you can cut any kind of material with it. It will now not leave the edges sharp at all. It is likewise portable like the other saws we indexed above. You just have to plug it and it will begin working. If you aren’t a professional then you ought to be very careful while using it.

Customer review’s

Precise, accurate, and convenient – this is all I have to say about this product.

What Else to Know?

Type of Tile Saws


Just like any other product, tile saw come in all different types that offer different performance and features to accommodate every person’s need. There are three basic types from which you can choose. It will also help you in choosing the best-wet tile saw for under $300.

  • Handheld Wet Tile Saw

Working – these tile saws come in with a diamond-tipped circular blade and a water system that keeps the dust in control and also keeps the machine from overheating.

Best for- Handheld tile saws are the most effective for smaller projects and repairing jobs along with DIY projects.

Features – Water circulation system – affordable – portable

  • Tabletop Wet Tile Saw

Working – these tile saws are mounted on the top. There are mounted on the table for convenient and precise use.

Fixed tabletop tile saws; rely on the tile to be pushed towards and into the circulating blade along with the water circulating system.

Feature – they are cheaper – portable – convenient to use

Sliding tabletop tile saw; these sliding tabletop tile saws offer a precise and professional cutting with secured tile on the rollers that are pushed accordingly as per the requirement.

Features – sliding tabletop tile saw offers precise cutting – reduced water consumption – portable.

  • Overhead Tile Saw

Working – As the name specifies, these tile saws work from the top, moving in the desired direction. The tile stays fixed on the table.

Best for – these are the best when it comes to working for a longer period of time non-stop.

Features – overhead tile saws offer accurate cuts – water pumps – illuminating lights – better control.



A capability of cutting different shapes and almost every type of material counts as a leveling. Make sure to read the specifications before making a purchase as it will not only save you effort but money on buying different products for different purposes.


Cutting can be effort and time-consuming if you are not using a machine that comes with enough power. Do not forget to look for a product that comes with appropriate speed and torque that offers quick and effortless cutting.

There are chances of shattering or cracking a tile with saws that do not offer enough power.

Cutting Capacity/Volume


Some of the tile saws are designed to offer performance for longer or professional use, while others are just designed for smaller DIY projects. The performance can count for the running time and blade size mainly. Make sure to get the one that suits your need and requirement depending on what type of tiles you are going to work with and for how many hours.  


Accessories – versatility – adaptability; it is important to achieve new levels when it comes to performance. To break the chain and go beyond the limits, always go for the tile saw that can be accessorized to fit a wide range of tasks. For instance; you can always add table extensions, tile fixers, leveling kits, and even lasers that can be added to compatible tile saws to get the best work done in the least time.

Finding a tool that is more practical than just the appearance or the price is the best way out of all the work problems. There is a lot of reasonable and practical wet tile saw in the market, which makes it harder for the customers to choose the right one.


Having to do the tasks yourself may be cost-effective, and these power gear are designed to offer whatever it needs to upgrade your working. Once you are sure of your needs and requirements, you are ready to make the best purchase of your life, keeping the important features, priority. Besides all these, lowes tile saws can also be of great help as they excel in their task. In our recommendation, the best-wet tile saw under $300 is SKIL Tile Saw.


1. What type of blade will give the best result?

It relies upon what you’re going to cut with the blade. If you want nice results then you want to realize approximately the capabilities of the blade and its use on substances properly.

A diamond blade is good for all kinds of cloth cutting. It offers each reduces a professional and clean look. However, handiest the blade will not give you good effects if do not know the way to use it. So knowing the hints of the usage of notice is important for better consequences.

2. How can I make my wet tile saw last longer?

If you want to make your tile saw last longer then, first of all, you want to buy the right tile noticed device and cut the materials that are handiest maybe reduce with that. And you have to work with it in the right manner and lastly preserve it after you are done working.

3. how to use a tile saw?

  • Position the tile saw onto a level, sturdy surface. Just as with any power tool, you want the tile saw to be securely positioned and level.
  • Fill the tile saw’s reservoir with water.
  • Position the tile onto the cutting table.
  • Turn the tile saw on.
  • Feed the tile into the blade.
  • Remove the tile and turn off the saw.

4. how to cut tile with a wet saw?

The diamond blade can cut the hardest varieties of tile. The wet saw is a must if you’re cutting glass tiles.  You also need to practice using a moving saw to cut straight lines.

5. Do you cut ceramic tile face up or down?

Place the tile on the saw’s platform. If the blade lowers, the top of the tile should face up. If the saw blade is in the platform which cuts tiles from the bottom, the tile should be face down.

6. How do you cut stone tile without a wet saw?

Hacksaw. One alternative to cutting stone tile with a wet saw is to make cuts using a manual hacksaw.
Tile Cutter. Manual tile cutters equipped with tungsten carbide blades can be used to cut many types of tile, including stone.
Hammer and Chisel
Tile Nippers

7. What kind of drill bit do I use for porcelain tile?

Diamond-tip drill bits are more expensive, but they do exactly what you need. The diamond-coated end of the tile bit or hole saw is specifically made to drill through tile and porcelain. Really, when you’re drilling through porcelain or tile, the bit isn’t actually drilling at all.

8. Can you cut tile with a jigsaw?

To cut through ceramic tile, you will need a power tool with an abrasive blade. Fortunately, a jigsaw with an abrasive carbide (or diamond) edge can cut ceramic tile cleanly and safely – plus it can make notches, slanted cuts, and openings that few other power tools can.

9. How can I cut tile without a cutter?

To cut a tile without a tile cutter, you can use an angle grinder. You’ll want to use a continuous rim blade, which makes a much smoother cut than a serrated blade. Secure your tile to a workbench with a C-clamp. Then, go over your cutline a few times, instead of trying to cut through it in one motion.

10. Can you cut natural stone with a tile cutter?

A manual tile cutter may be used to cut natural stone tiles only if it has tungsten carbide blades. Such a tool can be rented instead of purchased if you are not planning more home improvements that include cutting natural stone tiles.

For more reviews, Click Here.