Best memories are always made when good music is played, on a long drive, surrounded by friends, and having fun. For us, there is no compromise on the sound quality of our music. If you have the same belief you will know just how important door speakers can be.
They add an extra dimension to the music and make the situation more amusing. Choosing the best door speaker for bass is not always an easy task.
Buyer’s Guide
Door speakers for bass are a technical item and thus there are a lot of specific things that will be discussed when talking about the product. To eradicate any sort of confusion we will be discussing some important factors in this buyer’s guide. So that you are aware of everything beforehand that you will need to consider for the perfect buy.
Frequency Range
There is a certain frequency that humans can understand or is audible to humans. When it comes to bass the lower the frequency is the deeper the base is going to be and the better will be its delivery. So when considering the frequency range of a speaker it is important to understand how a frequency range works and how it influences the performance of your speaker.
RMS
Scientifically speaking the RMS is the average of the entire waveform that will be generated as a result of electrical output. The peak itself is the highest value that exists on the waveform. RMS stands for root mean square.
A 45 RMS rating speaker with a peak of 90 Watt means that the speaker deploys a continuous power of 45 Watts with the highest peaks reaching 90 Watts.
Sensitivity
The sensitivity of a speaker defines its ability to produce high-quality sounds with minimum consumption of power. Higher sensitivity speakers range from 85 to 90+ decibels. Speakers with such numbers will be able to maintain the quality of sound & it’s clarity even if it is played at a very low volume.
Two-Way and Three-Way Speakers
A three-way speaker is a speaker that has an addition over the two-way speaker. This refers to an additional midrange speaker. This greatly improved the quality of sound. Since 2-way speakers are one less than three, they don’t have a midrange speaker.
Woofer
As bass originates at woofers, it is ideal for receiving low-frequency sounds. A woofer cone is an integral part of the woofer and it needs to be lightweight yet stiff. The most famous woofer cone material is polypropylene.
It should have the ability to withstand extreme temperatures as the weather inside the car can get extremely hot or cold, depending upon the time of the year.
Power-handling
The maximum RMS value is the power handling limit of a car door speaker. Basically, it indicates the amount of power your speakers can withstand. A high-power system will be able to handle high power and vice versa.
Budget
The one thing that remains constant throughout all purchasing endeavors is the consideration of expenditure. We all have a preset budget in our minds every time we buy something. It’s important to be aware of your budget beforehand so you can classify each product that fits your criteria.
Speaker Sensitivity
Speaker sensitivity refers to a speaker’s ability to deliver a certain quality of sound at a specific power. Almost all car door speakers operate at a lower power. Low power stereos go well with car speakers of a high sensitivity range and vice versa.
Car Speaker Size and Configuration
All cars have different dimensions internally thus, different speakers fit different cars. Considering this its important to measure the dimensions of previously installed or existing car speakers. Similarly, being aware of the configuration of previously installed speakers will serve as a preliminary understanding of the new unit.
Quality
The quality of car door speakers is heavily dependent upon their surroundings. Since the surrounding temperatures and overall conditions will heavily influence the materials the speaker is composed of. The material that has the most longevity is rubber. It protects the outer of the speakers from harsh temperature conditions and moisture. Foam is another material that is cost-efficient but protects the speakers.
Top 8 best door speakers for bass
We have collected the top 8 best door speakers for bass that will be easy on your pockets and wonderful for your time together.
| Image | Name | Features | Rating | Price |
|---|---|---|---|---|
 | PUMA Tazon 6 Cross | ☞Stylish ☞Durable ☞Allows support | 4.9/5 | View Product |
 | New Balance MX608V4 | ☞Good fitting ☞Durable ☞High quality material | 4.8/5 | View Product |
 | Adidas Performance Powerlift | ☞Comfortable ☞Durable ☞Lightweight | 4.6/5 | View Product |
 | Merrell Vapor Glove 3 | ☞Lightweight ☞Breathable ☞Minimal design | 4.7/5 | View Product |
 | Vibram FiveFingers | ☞Lightweight ☞Comfortable ☞Variety of colors | 4.8/5 | View Product |
 | PUMA Cell Surin 2 | ☞High quality ☞Affordable ☞Comfortable | 4.9/5 | View Product |
 | ASICS Gel-Craze | ☞Firm ☞Lightweight ☞Good support | 4.7/5 | View Product |
 | Nike Free 5.0 | ☞Responsive ☞Breathable ☞Lightweight | 4.8/5 | View Product |
 | Adidas Speed 3.0 Cross | ☞Stable ☞Pull-on tab ☞Lightweight | 4.7/5 | View Product |
 | New Balance MX857 Cross | ☞Good support ☞Lightweight ☞Removable insole | 4.8/5 | View Product |
 | Reebok Crossfit Nano 7 | ☞Lightweight ☞Flexible ☞Breathable | 4.6/5 | View Product |
1. 4 New Rockford Fosgate R165X3 6.5″
Features
- Weight: 9.78 pounds
- Dimension: 20 x 8 x 8 inches
- Looking for a cost-friendly option that is easy on your pockets but sweet on your ears? The 4 New Rockford Fosgate R165X3 is a prize to cherish. It brings the perfect dynamic of quality with affordability.It features a polypropylene woofer cone that ensures an outstanding high and mid-frequency response. Its silk and piezo super tweeters are just the cherries on top. The bass experience with this Rockford Fosgate speaker is far better than many of its competitors, thanks to its wide cone surface area.It includes four six- and half-inch speakers. With a 45-watt RMS power range and 90 watts peak, great sound quality is maintained. Perfect for a custom system or stand-alone replacement, these speakers will be the perfect addition to your ride.While it shines bright due to its various features some users found its installation a bit due to its unnecessarily long screws. Distortion on higher volumes was reported too.
Pros
- Affordable
- Perfect upgrade
- Beautifully built
- Easy setup
- Good quality
Cons
- High volumes distortion
- Hectic installation
2. Rockville RVP12W8 1200w
Features
- Weight:12.9 pounds
- Dimension: 3 x 3 x 3 inches
If you want to feel the bass vibrations right into your soul, then the Rockville RVP12W8 is the right choice for you. Built to compensate high power outputs with its 600-watt peak power you will feel the rhythm – literally.
Its damage resistant rolled steel basket provides a hefty, durable, and sturdy piece of equipment. Its two twelve-inch subwoofers have a combined peak of massive 1200 watts. If you are afraid of being blown into the sky due to the 1200 watts peak, you can easily place these in the trunk of your car or under the seats.
Be careful though some cars may not be able to handle all this power. The bass can be a bit much for some vehicles and the size can problematic for some cars too.
Pros
- Great value for the price
- Out of the world sound experience
- Durable steel basket exterior
Cons
- Too huge for certain vehicles
- Bass can be excessive for certain cars
3. Pioneer A Series 6.5”
Features
- Weight: 3.6 pounds
- Dimension: 13.5 x 3.5 x 7.5 inches
Affordability without any sacrifice on quality. That is what Pioneer A Series is all about. Multilayer mica matrix cone structure distributes distortion-free, wide-ranged sound.
This system features two six-inch speakers with a 300-watt peak. It has an easy installation and an RMS value of 50 watts.
An important feature of the Pioneer A series is its heat resistant voice coil wire. Thanks to this the overall durability and longevity of the system is ensured. The only problem some people faced were with the equalization and almost flat sounding mid-range at higher volumes.
Pros
- Distortion-free bass
- Durable
- Heat resistant voice coil wire
- Affordable
- 3-way speaker technology for unmatched sound quality
Cons
- Flat midrange at higher volumes
- Difficult equalization
4. Rockville RM64SP CEA Compliant 6.5”
Features
- Weight: 3.96 pounds
- Dimension: 9 x 8.5 x 3.5 inches
Making quite a bold fashion statement with its blue rims the Rockville RM64SP delivers quality music even at high volumes. It features a capacitor, built into the system, that is already prewired which ensures that no possibly damaging frequencies are ever played, providing longevity and durability to the system.
It comes with four 6.5-inch speakers that provide more flexibility than the standard two-speaker system to build the perfect custom sound system. It has an RMS value of 60 watts and a peak power of 120 watts.
This is a hand-built unit, but its tweeters are a bit smaller than average.
Pros
- Heat distribution
- Blue rims add a stylish look
- Extended vocal range thanks to dual cones
- Prewired capacitor for speaker blow up prevention
Cons
- Brassy tweeters
- Small tweeters are not sufficient for large cars
5. JBL GT7-6C 6.5″ 2-Way
Features
- Weight: 4.4 pounds
- Dimension: 6.7 x 5.9 x 3.2 inches
Beautiful design, cost-efficient, sturdy structure – these are just some of the words used to describe the beauty that is the JBL GT7-6C 2-way sound system. It delivers superior bass with its wide-area polypropylene woofer.
All vocals become sweeter with its dome tweeters that bring an edge to the natural sound. It has one of the widest polypropylene cones from all the products we have listed today. The wide area makes for increased low-frequency output with high sensitivity for crystal clear sound.
The sound quality of this speaker is always appropriate regardless of the pitch at a 21kHz frequency response.
It includes two 6.5-inch woofers/ two external crossovers and two tweeters. It has a power peak of 150 watts with an RMS of 50 watts. These two tweeters require universal backstraps to be installed in the factory locations.
Some users experienced glitches at higher volumes.
Pros
- Natural sound even at high frequencies
- Strong bass
- Aesthetic design
Cons
- Universal backstraps required for tweeters installation
- High volume glitches
6. Pyle PL63BL
Features
- Weight: 1.32 pounds
- Dimension: 14.7 x 3.1 x 7.3 inches
Maybe this is your first time trying to set up a sound system and you want too to start with something light. Pyle PL63BL is the perfect entry-level sound system that is easy on the pockets and user friendly.
It is a 3-way model with a strong bass delivery thanks to the built-in woofer. Not only is this a good quality product it is also very aesthetically pleasing with its blue polyurethane injection cone.
It has a peak power of 60 watts and an RMS value of 30 watts. It comes with 2 6.5-inch speakers. It is sturdy because it has bulky rubber protectors that can be annoying for some people. Its tweeter sticks out a bit as well.
Pros
- 3-way design
- Rubber surround
- Sleek cone design
- Cost-efficient
Cons
- Bulky rubber protectors
7. Kicker DSC650 Speakers
Features
- Weight: 4.6 pounds
- Dimension: 8 x 8 x 7 inches
Another wonderfully competent yet affordable product on our list is the Kicker DSC650. It is a 2-way speaker that is easy on the pockets yet satisfies all your sound system needs. With crystal clear sound and boosted bass, these speakers fashion a great mid-range and treble.
Its polyester foam surround provides protection to the system from external forces. It has a peak output of 240 watts making it one of the strongest items on our list so far. It comes with splice connectors for easy mounting. Overall, it’s a good buy especially for its price point but a few of the users reported some distortion.
Pros
- Affordable price
- Full-range audio
- Great volume
Cons
- Distortion
8. Rockville RW10CA 10″ 800 Watt
Features
- Weight: 14.25 pounds
- Dimension: 12.4 x 13.4 x 2.7 inches
The last item on our list today is the Rockville RW10CA sound system that has prewired capacitor crossovers for honey-like frequency. Its two 10-inch speakers are on the larger end of the standard car door bass speakers.
It is cost-efficient and has a peak power output of 600 watts. Since it is bigger than the standard size it can be a bit difficult to install.
Pros
- Prewired capacitor crossovers
- Clear sound
- Affordable
Cons
Conclusion
We hope this article has set you on the right path for car door speaker discovery. All the products above are the cream of the crop. Just personalize your buy precisely and have a wonderful experience with the perfect bass-boosted sound.
To all our bass lovers we wish you endless drives of musical fun. Happy shopping!
FAQs
1. Do I need a car audio amp?
Car audio amps are not a compulsion but rather a preference since they enhance sound quality.
2. Will better door speakers enhance the sound of my radio?
The purpose of door speakers or speaker sin general is to enhance the sound quality, not the signal strength. Since FM radio signals are a whole different domain, if they are weak nothing can be done.
3. What is the best door speaker size for cars?
All car door speaker sizes vary just as car sizes vary. There is no fixed standard however, most modern cars adorn a 6.5-inch speaker size.
4. How do I get more bass on my speakers?
To get more bass from your speaker place them in a box that is larger with respect to the diameter of the speaker. The larger the box, the deeper the bass output.
5. Do midrange speakers have bass?
Yes, midrange speakers have bass. Also referred to as mid-woofers, these speakers produce high bass frequencies.
6. What is the difference between speaker and woofer?
The main difference between speakers and woofers is the frequency range. Speakers pertain to an electro-acoustic transducer. On the other hand, woofers and subwoofers are used for bass sound.